Oregon Well Data field records · 2026 survey

Oregon Well Data › Curry County

Curry County, Oregon: well depth, water level & drilling cost

✓ 3,422 OWRD records · verified 2026-06-30

71 ftmedian well depth
42 ft–140 fttypical depth range
28 ftmedian static water level
10 gpmmedian yield (2,598 tests)

How deep are wells in Curry County, Oregon?

The median drilled well depth in Curry County is 71 ft, based on 3,043 wells with recorded depths in the state OWRD database. Half of all wells fall between 42 ft and 140 ft; 90% are shallower than 210 ft. Wells drilled since 2016 have a median depth of 101 ft.

How much does it cost to drill a well in Curry County?

Applying published per-foot rates to the local median depth of 101 ft: drilling and casing alone typically runs $2,525–$6,565; a complete system including pump, pressure tank, and hookup typically runs $6,060–$10,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Curry County?

The median static water level is 28 ft below ground surface (middle half of wells: 15 ft–50 ft), from 2,956 measurements.

How much water do wells in Curry County produce?

The median tested yield is 10 gpm (middle half: 5 gpm–20 gpm), from 2,598 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Curry County address — $19

Drilled depth distribution

0–50 ft 982 50–100 ft 855 100–150 ft 496 150–200 ft 287 200–300 ft 328 300–400 ft 75 400–600 ft 19 600+ ft 1

Who drills wells in Curry County?

Companies by number of wells completed in this county since 2016, per filed well logs (Oregon Water Resources Department).

DrillerWells since 2016
BANDON WELL & PUMP COMPANY296
APPLEGATE WELL DRILLING LLC107
BARRINGTON WELL DRILLING LLC12
SOUTHERN OREGON WATER WELLS11
WRIGHTS ARTESIAN8
LAND OWNER4
WRIGHT'S WELL DRILLING4
CASEY JONES WELL DRILLING CO INC3

Get quotes from local drillers

Looking at a specific property in Curry County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.