⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Lane County

Lane County, Oregon: well depth, water level & drilling cost

✓ 34,640 OWRD records · verified 2026-06-30

110 ftmedian well depth
63 ft–204 fttypical depth range
20 ftmedian static water level
20 gpmmedian yield (29,916 tests)

How deep are wells in Lane County, Oregon?

The median drilled well depth in Lane County is 110 ft, based on 32,039 wells with recorded depths in the state OWRD database. Half of all wells fall between 63 ft and 204 ft; 90% are shallower than 330 ft. Wells drilled since 2016 have a median depth of 160 ft.

How much does it cost to drill a well in Lane County?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Lane County?

The median static water level is 20 ft below ground surface (middle half of wells: 11 ft–42 ft), from 31,982 measurements.

How much water do wells in Lane County produce?

The median tested yield is 20 gpm (middle half: 8 gpm–35 gpm), from 29,916 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Lane County address — $19

Drilled depth distribution

0–50 ft 5,349 50–100 ft 8,327 100–150 ft 6,145 150–200 ft 3,280 200–300 ft 4,429 300–400 ft 2,402 400–600 ft 1,713 600+ ft 394

Who drills wells in Lane County?

Companies by number of wells completed in this county since 2016, per filed well logs (Oregon Water Resources Department).

DrillerWells since 2016
CASEY JONES WELL DRILLING CO INC1,039
HENDRICKSON WELL DRILLING INC457
BILL FIELDER WELL DRILLING & PUMP298
LEE DRILLING221
WEST COAST WELL DRILLING LLC191
WHITE WATER WELL DRILLING178
MID VALLEY DRILLING INC90
WEST COAST DRILLING89

Get quotes from local drillers

Looking at a specific property in Lane County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.