⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Lincoln County

Lincoln County, Oregon: well depth, water level & drilling cost

✓ 3,262 OWRD records · verified 2026-06-30

110 ftmedian well depth
75 ft–175 fttypical depth range
27 ftmedian static water level
6 gpmmedian yield (2,546 tests)

How deep are wells in Lincoln County, Oregon?

The median drilled well depth in Lincoln County is 110 ft, based on 2,837 wells with recorded depths in the state OWRD database. Half of all wells fall between 75 ft and 175 ft; 90% are shallower than 250 ft. Wells drilled since 2016 have a median depth of 100 ft.

How much does it cost to drill a well in Lincoln County?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Lincoln County?

The median static water level is 27 ft below ground surface (middle half of wells: 15 ft–43 ft), from 2,731 measurements.

How much water do wells in Lincoln County produce?

The median tested yield is 6 gpm (middle half: 3 gpm–12 gpm), from 2,546 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Lincoln County address — $19

Drilled depth distribution

0–50 ft 251 50–100 ft 876 100–150 ft 779 150–200 ft 348 200–300 ft 409 300–400 ft 115 400–600 ft 57 600+ ft 2

Who drills wells in Lincoln County?

Companies by number of wells completed in this county since 2016, per filed well logs (Oregon Water Resources Department).

DrillerWells since 2016
CORVALLIS DRILLING CO INC189
DICKERSON WELL DRILLING23
JONES WELL DRILLING CO INC15
WEST COAST WELL DRILLING LLC9
CASEY JONES WELL DRILLING CO INC7
STEVE KASER5
LAND OWNER4
HENDRICKSON WELL DRILLING INC3

Get quotes from local drillers

Looking at a specific property in Lincoln County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.