⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Linn County › Mill City (97360)

Mill City, OR (97360): well depth, water level & drilling cost

✓ 337 OWRD records · Linn County

84 ftmedian well depth
60 ft–143 fttypical depth range
25 ftmedian static water level
23 gpmmedian yield (297 tests)

Pull every recorded well near a Mill City (97360) address — $49

How deep are wells in and around Mill City (97360), Oregon?

The median drilled well depth in and around Mill City (97360) is 84 ft, based on 312 wells with recorded depths in the state OWRD database. Half fall between 60 ft and 143 ft; 90% are shallower than 215 ft.

How much does it cost to drill a well in and around Mill City (97360)?

Applying published per-foot rates to the local median depth of 84 ft: drilling and casing alone typically runs $2,100–$5,460; a complete system including pump, pressure tank, and hookup typically runs $5,040–$8,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mill City (97360)?

The median static water level is 25 ft below ground surface (middle half of wells: 13 ft–45 ft), from 314 measurements.

Drilled depth distribution

0–50 ft 49 50–100 ft 132 100–150 ft 60 150–200 ft 31 200–300 ft 25 300–400 ft 12 400–600 ft 3 600+ ft 0
Looking at a specific property in Mill City (97360)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mill City (97360)

Free. Goes to licensed drillers working Linn County.

Part of Linn County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.